2019 September/October Set 4

[TheToaphster]

Originally Posted by psychoangel691

Warm Hands in Cold Fog (TheToaphster): [ 9 / 10 ]
Damn this is fantastic haha. Really nice song choice and a lot of care taken into selecting out certain sounds which makes leads to a still bursty file that isn’t super cluttered.
( * ) SM Offset should be changed to -0.073, which might slightly change some of the coloring you’ve got going on so that would have to be gone through again and adjusted
82.561: This 3-note jack might be a bit much, especially with it being on (3) right after that 4th on (4) just beforehand
( * ) Would shift patterning slightly to remove the anchor on (2) here.
The further anchors are better fit as they go along with that hi-hat rather than just pure drum fill
( * ) Missing notes in spots like 111.902,116.435, 122.451,126.984. Would be fine as is except you have the tiny burst stepped at 125.501 so there’s inconsistency. Either remove this one you’ve got and replace with the white notes like the others, or add notes to the other sections instead

I fixed the 3-note jack, and I removed the burst at the end because I'm just not gonna deal with the snaps and pattern balance for the missing ones.

With respect to SM Offset, I'm not sure if that referring to the normal offset that is used (and also why changing it would affect the colored arrows). If it is just referring to the normal offset I'm also not sure why the offset would have to be changed so drastically given my current file is at 0.598 offset. Let me know what to do here if I'm missing the point lmao

Originally Posted by psychoangel691

( * ) Would shift patterning slightly to remove the anchor on (2) here.
The further anchors are better fit as they go along with that hi-hat rather than just pure drum fill

Is this supposed to have a time attached to it?

[Gradiant]

Originally Posted by TheToaphster

I fixed the 3-note jack, and I removed the burst at the end because I'm just not gonna deal with the snaps and pattern balance for the missing ones.

With respect to SM Offset, I'm not sure if that referring to the normal offset that is used (and also why changing it would affect the colored arrows). If it is just referring to the normal offset I'm also not sure why the offset would have to be changed so drastically given my current file is at 0.598 offset. Let me know what to do here if I'm missing the point lmao



Is this supposed to have a time attached to it?

For the offset, I'm calling it that due to it's naming when using ddream.


The offset change to -0.073 from -0.061 makes notes much more accurate to the waveform spikes. A change like that might seem to small to care about, but for a file that's technical like this, having notes matching the waveform as good as you can is worth the shift.


For the last note, yeah damn my bad. That is referring to 97.314, though looking at it again fresh and not after going through like 4-5 other files it doesn't seem as bad as I had thought it did. I'll remove that as a major changing point for it to get accepted and leave it to your discretion if you want to adjust that, though it's still something I'd suggest to do.

[TheToaphster]

Originally Posted by Gradiant

For the offset, I'm calling it that due to it's naming when using ddream.

Ok so this might be a really stupid question. If I am using AV how do I change this. Like I said the normal offset in AV is 0.598, significantly different from the number you have in ddream. So it's either this number is not what you are referring to or something is off between av/ddream.

[TC_Halogen]

Originally Posted by TheToaphster

Ok so this might be a really stupid question. If I am using AV how do I change this. Like I said the normal offset in AV is 0.598, significantly different from the number you have in ddream. So it's either this number is not what you are referring to or something is off between av/ddream.

The discrepancy that exists is a result of one of DDreamStudio's worst quirks: the inability to support positive offsets.

[TheToaphster]

Originally Posted by TC_Halogen

The discrepancy that exists is a result of one of DDreamStudio's worst quirks: the inability to support positive offsets.

Ok so if I just change the offset in AV -0.012 from where I have it now it will have the same effect as if I were to change the offset in ddream to what gradiant has, if im understanding this correctly?

Edit: either way I have updated the chart with new offset + slightly edited pattern to remove the anchor on 2. If the offset thing needs to be changed again I will send another update in